© Copyright Esol link
Although the types and places of use of central machinery industrial dust collector vary, most of the features are common, such as:
1. High technical parameters such as power, suction and air volume
Regardless of the type of vacuum cleaner mentioned above, its parameters such as power, suction rate, and air volume are 1-3 times greater than those of household vacuum cleaners. For example, the power range of household vacuum cleaners is around 1000W on average, while the power of central machinery industrial dust collectors is around 2.5-3.5KW.
2. High configuration of basic accessories
Accessories such as vacuum hoses, vacuum brushes, dust buckets, and filters are superior to household and commercial vacuum cleaners in terms of size, material, and quality. Affected by the working environment of the central machinery industrial dust collector, the configuration of these accessories has also been upgraded, but the accessories of ordinary materials and sizes cannot collect a large amount of dust, iron filings and other wastes, nor can they be used in special environmental places (metallurgy). High temperature places such as factories and petrochemical plants).
3. There are many functions and applications
Vacuuming, water absorption, oil absorption, metal particulate matter... central machinery industrial dust collector can absorb almost any garbage and particulate matter, and it is not limited to factory workshops, but can also be used in commercial places and residential properties. Effect.
4. Long working life
The industrial vacuum cleaner adopts an industrial brushless turbine fan, which not only requires no maintenance, but also has a long battery life. As long as there is no problem with the power supply, the central machinery industrial dust collector can be used with the workshop production equipment without stopping for a long time, and the dust collection effect is good.
5. Low failure rate and long service life
The average service life of a household vacuum cleaner is 3-5 years, and families that can reach more than 5 years really love it, but during the use period, household vacuum cleaners will still cause machine failures, performance degradation, and poor results due to various factors. .
However, the central machinery industrial dust collector will not, because its overall configuration is high, the average service life is about 10 years, and the failure rate is almost zero. During the use period, the factory can restore the factory by replacing consumables such as filters according to the severity of the environment. The effect is that you don't have to worry about the constant failure and performance degradation of household vacuum cleaners.
central machinery industrial dust collector https://www.kaisenfilter.com/Products
The fluoroplastic alloy chemical centrifugal pump combines all the excellent characteristics of the magnetic pump, and the advantage is that it can be self-priming. Generally, the self-priming height can reach 2-4 meters. It fully combines all the advantages of the self-priming pump and the magnetic pump. It has the function of self-priming. , And cancel the shaft seal, the use of magnetic coupling indirect transmission, eliminating the phenomenon of dripping.
Fluoroplastic alloy chemical centrifugal pump is widely used in petrochemical industry, non-ferrous metal smelting pesticides, acid and alkali production, papermaking, pickling process, rare earth separation, electroplating, electronics, chemical foil and other industries to absorb and transport corrosive liquids below the installation position of the pump. , is a product with novel structure in the current magnetic pump variety, high efficiency, energy saving, safety and practicality.
Instructions for use and maintenance:
1. Open the outlet valve by about one third to start the self-priming pump (ie, open the valve to start), and then slowly adjust the outlet valve so that the pump cannot work normally.
2. The self-priming pump is not allowed to generate air suction during work. Once air suction occurs, the perfusion liquid must be re-drained to be self-priming. Therefore, the user must have a device to control the minimum liquid level or send someone to take care of it to prevent the medium in the pool from being emptied.
3. When conveying general non-crystalline medium, if you stop the pump for a long time and then use it, check whether the liquid in the pump body is sufficient before starting. Please make up for self-priming.
4. When conveying medium containing easy crystallization, if the pump is not used for a period of time, the pump cavity must be flushed, and no crystallization medium shall remain, so as to prevent damage when the pump is restarted after crystallization; Suck.
5. When installing the pipeline, connect the inlet pipe first, fill up the liquid and then connect the outlet pipe.
6. The self-priming height can be easily calculated by the formula: when the water is clean, the self-priming 3m/medium density = the actual self-priming height.
7. The self-priming pump cannot transport media that will produce a large number of bubbles, nor can it transport gas-liquid mixed media.
fluoroplastic alloy chemical centrifugal pump https://www.luolintec.com/IHF-fluorine-lined-chemical-pump.html
316 stainless steel angle bar is 316 stainless steel angle bar, mainly used in various construction and engineering structures, such as building beams, bridges, power transmission towers, lifting and transporting machinery, ships, industrial furnaces, reaction towers, container racks, warehouse shelves, etc. .
316 stainless steel angle bar
It is mainly divided into two types: equilateral stainless steel angle steel and unequal side stainless steel angle steel. Among them, unequal side stainless steel angle steel can be divided into unequal side thickness and unequal side thickness.
316 stainless steel angle bar performance
1. Corrosion resistance
The corrosion resistance is better than 304 stainless steel, and it has good corrosion resistance in the pulp and paper production process. And 316 stainless steel is also resistant to the erosion of the ocean and the corrosive industrial atmosphere.
2. Heat resistance
In intermittent use below 1600 degrees and continuous use below 1700 degrees, 316 stainless steel has good oxidation resistance. In the range of 800-1575 degrees, it is best not to continuously act on 316 stainless steel, but when 316 stainless steel is continuously used outside this temperature range, the stainless steel has good heat resistance. 316L stainless steel has better resistance to carbide precipitation than 316 stainless steel, and the above-mentioned temperature range can be used.