kaisen's blog

fume extractor carbon filter elements form electric currents due to the movement of ions. To begin with, there are fewer free ions in the air and less current. When the voltage rises to the corresponding value. After the power is switched on, the ions near the discharge get a good energy and speed. When they hit the neutral atoms in the air, the neutral atoms will break down into positive and negative ions. This phenomenon is called air ionization. Basically, it is widely used in cement or non-ferrous metals and garbage incineration, as well as in various industries such as mechanical and chemical engineering. Moreover, it can also see dust removal equipment in some serious places. Most of the dust is deposited on the corona and accumulates for a long time to reach the corresponding weight. Due to the gravity, the dust falls into the collection tank to complete the dust removal function.

fume extractor carbon filter element gas bag after processing and production what are the problems?

1. If the dust collector air bag is designed according to the pressure window standard and has a large enough cellar, the basic body is a compressed gas stabilized gas tank. When there is a stabilizing tank in front of the dust collector's air bag, it is necessary to install the stabilizing tank near the dust collector's air bag in the day to prevent the compressed gas from losing pressure through the slender pipe in the conveying process.

Second, fume extractor carbon filter element gas bag after processing and production, continuous injection with compressed gas to clean the internal welding slag, and then install the valve. When testing the pulse valve in the workshop, especially the 76mm diameter submerged valve, determine the pressure of the dust collector's bag compressed gas and the replenisher gas flow, otherwise the pulse valve will not be able to open or leak.

Three, if after installation on site, it is found that the upper air outlet of the valve leaks. That is because the dust collector air bag contains impurities, resulting in the accumulation of rust on the small diaphragm can not close the valve, the need to remove the small diaphragm cleaning.

Four, dust collector air bag is a pressure vessel, after manufacturing should be done not afraid of pressure test, test pressure is 1.5 times of the working pressure is appropriate. Consider and quality requirements when designing air bag of circular or square cross-sectional dust collector.

5. The bottom of each dust collector's air bag is equipped with automatic (i.e., two-position two-way solenoid valve) or manual oil-water blowdown valve, periodically discharging the impurities in the container.

fume extractor carbon filter element can cause dripping in the pipe during processing, making the lower part of the tank also collect water, this problem can cause moist compressed air blown in into the bag filter, bags will increase. In severe cases, corrosion of the cage can cause damage to the filter bag, which will affect the normal use of fume extractor carbon filter element.

The impurities in the compressed air should be filtered at first, and then the pressure difference should be adjusted to clean the fume extractor carbon filter element without affecting the normal use of the fume extractor carbon filter element. It is reported that fume extractor carbon filter element's resistance will increase after being used for a long time. I don't know why. In practice, this problem can occur due to long intervals between blowing periods. As the fume extractor carbon filter element types used by different industrial enterprises are different, the parameter Settings are not different. fume extractor carbon filter element has a long blowing interval, which on the one hand can extend the service life of the filter bag, but on the other hand, it will increase resistance. The setting of blower parameters should be based on the actual application.

fume extractor carbon filter element https://www.kaisenfilter.com/KSXH-26B-Soldering-Fume-Extractor.html