© Copyright Esol link
With the improvement of the medical level, the continuous innovation of the development of medical equipment, the strengthening of hospital infection control, the wide application of disposable low-value consumables in surgery in the operating room, which brings great convenience to the operating room work, but also can effectively prevent and control the occurrence of hospital feeling. Therefore, it is necessary to provide a more reasonable and complete management system and management process for disposable low-value consumables, and finally achieve savings and rational use on the basis of patient and medical satisfaction, fully reflecting the essence of high-quality nursing services. Hua Shang for low value consumables, put forward their own set of solutions.
Generally, low-value consumables are stored in low-value consumables, there are many kinds, different validity periods, different daily usage, and some demand is small, resulting in small demand for consumables that are not timely, and there may be expired phenomena. The operation room is usually unsupervised, the daily flow of people in the operating room is relatively large, in addition to the operating room nurse there are anesthesiologists, surgeons, interns, etc., and the operating room items are open, everyone's sense of ownership is not strong, resulting in the artificial loss of some low-value consumables such as silk thread, sterile surgical sleeve, sterile gauze, syringes, etc. The identification, specification and storage location of some consumables are not clear. Due to the long-term storage of excess medical consumables, the quality of some consumables is reduced, and the surgical requirements are not met, which increases the medical risk, and wastes resources to affect the flow of funds.
Standardize the management of low-value consumables: There are a wide variety of surgical consumables. In order to better cooperate with surgical operations and prevent surgical delays caused by failure to timely supplement or inadequate preparation of surgical consumables, silicone medical consumables fabricators must be established to provide full-time management of disposable consumables. Check the packaging, quality, disinfection and sterilization of the products every time you receive them, sample bacterial culture regularly, and keep files for future reference. Detailed understanding of the expiration date and current use of consumables, timely registration, to ensure traceability of each batch of consumables.
Rational placement of disposable low-value consumables in the operating room: Rational placement can reduce the expiration rate of consumables inventory and eliminate the phenomenon of nurses' misplacement. When the distance between the line of sight and the object is 30cm~50cm, the person's line of sight can only see the items displayed within 1m, so the longitudinal display can make people at a glance. This area displays consumables with large daily usage, making it easy to find and take. silicone medical consumables fabricators produced by Huashang are used to distinguish the inside of the basket, with clear labels, location and reasonable classification. Items with the nearest production date are placed in the back, those with the nearest expiration date are placed in the front, and items are added from back to front. For consumables that are valid within 3 months, use a yellow label to mark them on the label plate and indicate the words "use first" in text; Consumables that are valid for more than one year are identified with a green label.
silicone medical consumables fabricators https://www.nblukemed.com/about.html
The central dust removal system supplier consists of upper box, middle box, ash hopper, deflector, bracket, filter bag assembly, spray device, off-line valve, ash removal device, detection and control system, etc. The complete set of dust collector also includes maintenance platform, lighting system, maintenance power and other auxiliary equipment. The dust collector uses filter material to capture dust particles in the flue gas. The ability of filter material to capture dust particles determines the dust removal rate of the dust collector. Therefore, the whole process of the dust collector can be simply described as the control of the resistance of the dust bearing air flow through the dust collector, so that the filter material to maintain a large ability to capture dust particles, this control is to periodically clean the bag to prevent the air resistance is too large.
In the trial operation of the new central dust removal system supplier, special attention should be paid to the following points:
First, pay attention to whether there is condensation in the bag room and whether the ash removal system is dredged. Avoid blocking and corrosion, ash accumulation will affect the production of the main engine.
Second, the adjustment of cleaning cycle and cleaning time, this operation is an important factor about the dust collection performance and operation. If the cleaning time is too long, the attached dust layer will be cleared off, which will become the cause of leakage and damage of the filter bag. If the cleaning time is too short, the dust on the filter bag is not cleared off, the filtration operation will make the resistance quickly and gradually rise, affecting the application effect.
Three, fan rotation direction, speed, bearing oscillation and temperature.
Fourth, whether the treatment air volume and the pressure and temperature of each test point are consistent with the design.
Fifth, the equipment of the filter bag, after the use of whether there is a drop bag, loose mouth, wear and other conditions, after the operation can be visually measured chimney emissions to determine.
The central dust removal system supplier filter bag is the filter component of the central dust removal system supplier, and its cost accounts for about 10% to 15% of the equipment cost. The filter bag raw materials for the manufacture of filter bags directly determine the functional parameters of the central dust removal system supplier, such as the specifications of dust removal equipment, dust removal power, emission concentration, operating resistance, service life and other indicators. Therefore, when planning and using the central dust removal system supplier, the characteristics of dust gas (such as dust concentration, temperature, humidity, acid and alkali) and dust characteristics (such as particle size, viscosity, grinding) are considered, and the filter bag is correctly and appropriately selected to meet the needs of dust removal equipment.
central dust removal system supplier https://www.kaisenfilter.com/Central-Dust-Collector
Answer: To answer this question, you must first understand the basic working principle of GPS: The use of GPS positioning satellites, real-time positioning and navigation systems on a global scale, called Global Satellite positioning system, referred to as GPS. GPS is a comprehensive, all-weather, all-time, high-precision satellite navigation system developed by the United States Department of Defense, which can provide vehicle positioning, anti-theft, anti-robbery, driving route monitoring and call command functions. To achieve all the above functions must have GPS terminal, transmission network and monitoring platform three elements.
The long battery life gps tracker for trailer obtains satellite signals, calculates the latitude and longitude, sends the real-time location to the monitoring platform through the network (generally transmitted by SIM card traffic), and then presents it on the mobile APP or computer terminal, so as to achieve real-time positioning.
long battery life gps tracker for trailer https://www.eelinktracker.com/4g-lte-wcdma-gps-tracker-long-battery-life.html
brandy distillation equipment can be used in high-rise building secondary water supply, water storage, water treatment and purification equipment, electronics industry, industrial cold water, chemical preparations, chemical raw materials, all kinds of oil, drinks storage, transportation, sauce and vinegar storage tank, pure water tank, storage and circulation equipment.
According to the use classification can be divided into brewing stainless steel tanks, food stainless steel tanks, pharmaceutical stainless steel tanks, dairy stainless steel tanks and so on.
Food and pharmaceutical brandy distillation equipment has stainless steel ingredients storage tank, stainless steel concentrated storage tank, stainless steel dilute storage tank, stainless steel extraction tank, stainless steel reaction storage tank, stainless steel liquid storage tank, stainless steel stirring tank, stainless steel seed storage tank, stainless steel nitric acid storage tank, stainless steel glacial acetic acid storage tank, stainless steel distillation tank. Stainless steel carbon disulfide tank, stainless steel water tower storage tank.
Wine and dairy industry brandy distillation equipment has stainless steel wine storage tank, stainless steel liquor storage tank, stainless steel wine storage tank, stainless steel milk (milk) tank, stainless steel beverage storage tank.
brandy distillation equipment https://www.hzzjde.com/Brandy_Charande_Stills/60.html