What Do I Need To Make A 360 Lace Wig from mslynn's blog

<a href="https://www.mslynnhair.com/wig/360-wig.html">360 Wigs</a>, also known as 360 lace front wig, 360 lace frontal wig, and 360 wigs, is made of a 360 lace frontal and some hair bundles. The human hair in this lace part is knotted into the lace hole by hand. Another part of the 360 frontal wigs is made of the high stretch machine-made wig cap, bonding with the lace edge. It’s a <a href="https://www.mslynnhair.com/wig/360-wig.html">360 Lace Wig</a>, with a bigger parting space which allows a more natural, fuller, and thicker appearance look.

What Do I Need To Make A 360 Lace Wig

1. Secure The Mesh Cap And 360 Lace Frontal

Place the mesh breathable wig cap on a canvas head and cover the <a href="https://www.mslynnhair.com/wig/360-wig.html">360 Lace Front Wigs</a> onto the mesh wig cap. Drag the wig forward and down to where your ears will be when you wear it. Pin it down with some T-pins. Next, follow this same process on both sides of the head then pin down the 360 frontal sew in pinning around the mannequin head and firmly hold the wig cap in place. At this stage, you can cut the extra lace off. But it isn’t necessary or maybe even advisable.

2. Sew In 360 Lace Frontal

Once you have positioned the <a href="https://www.mslynnhair.com/wig/360-wig.html">360 Lace Frontal Wig</a> onto the weaving cap with some T-pins, you need to thread a needle and make double knots at the end to make sure it is secure. The next step is to hold the thread in your left hand and take the needle and thread to make it pass through lace and the weaving cap to stitch the 360 lace frontal to the wig cap. You need to stitch at the base of the lace where the lace meets the hair.

3. Sew-in Hair Bundles

Once you have secured the mesh wig cap and 360 lace frontal wig, you can start to sew in the hair bundles.

4. Cut Off The Extra Lace And Wig Cap

When you finish the sewing-in, use a wide-toothed comb to brush hair back and use a hand tie to tie together at the back of the 360 lace wig human hair. Then take a scissor to cut off the extra lace in the front. Take the 360 lace frontal wig off the mannequin head and cut off the wig cap that is inside the lace to be able to expose the least.

5. Apply Elastic Band And Combs

Now, it is time to sew the wig combs and band. Take thread and needles to attach the wig band inside your wig along the bottom of the cap to assist you to install the mslynn 360 lace wig onto your head stably later. And sew at least one comb on either side of the head and at the back as well. While all work is finished, you can style your 360 lace wig human hair according to your preference.

I hope you have found this guide useful. If you need any more help just let us know either by visit www.mslynnhair.com