WPS Method:
Before
proceeding to setup the wireless connection, you need to meet all the
requirements to use the WPS method.
- The physical push
button for WPS must be available for the access point. For more details
you can check the device’s user guide.
- If the push button of
WPS is not present then use the steps mentioned in the Windows Connection
Method Section.
- Make sure that your
Wi-Fi network is WPA (Wi-Fi Protected Access) or WPA2 security network.
Most of the WPS allows access point to use this protocol.
- Ensure that your
printer is switched on.
- Push and hold the
Wi-Fi button which is located on the printer and release the button once
the orange alarm light starts blinking.
- Ensure that your Wi-Fi
button starts flashing blue coloured light.
- Now click on the access
point and push the WPS button in 2 minutes.
- For more details of
how to press WPS button, please visit the access manual point.
The blue colour
of Wi-Fi lamp located on the printer will keep blinking until it gets connected
to the access point. During the process of cannon.com-Ig
setup.coma green colour power lamp will start blinking. The blue and green colour
light will stop blinking after it gets connected to the wireless network.
To make sure
that your printer is connected to the wireless network properly, you can check
it by printing a page:
- Switch on your
printer.
- Put the papers on the
input tray.
- Push and hold the
Cancel option and release it after the orange alarm light blinked for 15
times. The information page of network will start printing.
When mentioning
the print out, see if the “connection” shows “active” and the SSID (Service Set
Identifier) shows the right name of the wireless network.
You can easily
download the software and the driver with the help of CD provided with your
printer or you can download it from the canon official website.
Windows
Connection Method:
- Place the CD provided
with the printer and start the setup. If the CD is not working then insert
the CD again into your computer and go to the My Computer, choose the
CD-ROM and then double tap on the MSETUP4.EXE file.
- If the CD does not
cane with the printer then you can download the software and
manuals.
- In the first step, a
dialogue box will appear on your screen choose next.
- Choose the Wireless
LAN Connection to connect with the network and after that select next
option.
- For wireless LAN
connection, choose Access Point Connection and after that select Next
option.
- Make sure that the
printer is switched on, and the green colour power lamp is flashing then
select the Next option.
- The software will
search for network to connect with printer.
- If you are setting
your printer for the first time then make sure that you have selected the
“Setting printer not able to found” and then choose “next” option.
- The setup guide will
begin to install. Select “next” option.
- Select the “Cable less
setup”.
- A dialogue box will
appear on your computer screen, hold the Wi-Fi button located on the cannon printer install
and download and release it after the orange alarm
lamp blinks for 2 times and then choose “next” option.
- Ensure that the blue
colour Wi-Fi lamp blinks quickly and the green colour light is lit, then
choose the “next” option.
- You will receive a
message displayed on your screen. Choose the “next” option once you have
connect to the access point.
- On the next dialogue
box, choose your region and hit the “next” option.
- After this an another
dialogue box will display on your screen, choose your language and hit the
“next” option.
- In the dialogue box,
choose the software you want to install and then select the “next” option.
If you want to install any other software then don’t worry you can
uninstall this software and can later download another software.
- Now, select the “Yes”
option to agree all the terms and conditions.
- In the next option,
select the “next” option.
- The software will
start installing.
- If you are unable to find
your printer then select the “redetect” option to find your printer.
- After completing the
cable less setup, the name of network and the model of printer will
display on the computer screen.
- Now, select the
“execute” option and then complete all the steps given on your
screen.
- Select the “next”
option.
- If you want to
register the printer then choose “next” Or you can also register your
printer by using quick menu. Therefore, select “cancel”.
- If you want to choose
the Extended Survey Program then select the “agree” option.
- If you want to test
your printer then you can check it by printing a test page.
- Now in the last step,
select “exit” to finish the installation process.
Visit This Website: https://contactfor-guide.com/
The Wall